Is secondary fermentation necessary for beer? Its pros and cons?
Secondary fermentation is the process of taking beer from an initial fermentation bucket and transferring it to another container for additional aging. Many homebrewers like to take advantage of a process called “secondary fermentation,” and claim that it improves the quality of their homebrew beer.But is secondary fermentation necessary?Its pros and cons?
The Pros Of Secondary Fermentation
It gets the beer off spent yeast sediment
After two or three weeks, yeast starts to break down and contribute off flavors to your beer. Most homebrewers don’t ferment their beer long enough to cause any noticeably problems, but for those who choose to do a longer fermentation, racking the beer into a secondary fermenter or carboy is highly recommended. Unfortunately, when yeast uses up all of the sugars they don’t produce carbon dioxide and ethanol anymore.
Added Clarity and Maturity to the Beer
Putting your beer through secondary fermentation allows time for more yeast, hop trub, and protein to fall out of the beer. The additional time also allows the malt, hops, and yeast flavors to blend together which creates a more flavorful beer. Adding a fining agent, such as gelatin, into the secondary fermenter can aid in this process significantly. In the end, you will have a better looking brew with less sediment in the bottom of the bottle.
Gives the Opportunity to “Dry-Hop” or “Dry-Spice” the Beer
Dry-hopping is just adding hops to the secondary fermenter. This contributes to the hop aroma of the beer. It’s also the opportune time to add any spices, flavorings, wood chips, or other additives to your brew. You will see this a lot for seasonal beers.
There aren’t many disadvantages to using a secondary fermentation, but they’re worth considering:
An Extra Step in the Process
This may be the most obvious con to secondary fermentation. But secondary fermentation will It takes a more time and effort for you to do during the weeks long process it takes to make beer. How long it takes to transfer the beer will depend on your setup. Usually the time it takes to transfer is much shorter than brew day or bottle day. If you choose to go with a single stage fermentation than your work is done between the time brew day ends and it’s time to bottle your beer.
There’s a risk of contamination
By transferring your beer from one container to another you risk the addition of contaminants into the beer. As mentioned before, contaminants can be introduced from the environment around you or unsanitary equipment. As you open your fermenter and beer passes through a siphoning hose the risk of bacteria or wild yeast getting into your beer increases. Also, the risk of oxygen being introduced is a big risk in secondary fermentation. When oxygen is introduced into fermented beer it can lead to a cardboard-like or stale flavor. It adds to the cost since you need to buy an extra carboy. As long as all of your equipment is sanitized you should be fine.
Potential to Lose Hop Flavor
Hop flavors degrade over time. In most cases, a few weeks won’t make a difference, but if you’re brewing a very hop-forward beer, the length of the fermentation period should be considered.
Once your beer has cleared to your satisfaction in secondary fermentation it has probably also completed any biological benefits. So is secondary fermentation necessary and should you do it?
Some brewers only do it for lagers, some only with their “big” beers, and some for nearly every beer, to help with the clarifying if nothing else. It’s just one more tool to help you make that perfect beer.
If you are planning to open a brewery. TIANTAI BrewTech could help you answer your questions and supply the brewery equipment system. We supply 2-150bbl complete beer brewing brewery equipment system including malt milling equipment, brewhouse equipment, fermenters, brite beer tanks, beer bottling machine,beer canning machine, beer kegging machine, hopping machine, yeast propagation equipment. We also supply all auxiliary brewery systems like steam heating pipe and valves, water treatment, filter, air compressor etc. Everything in brewery are all in our list.
Request A Quote